www.codaoctopus.com  Home page
Back to Home Page Company information menu Marine geophysical survey menu Motion sensing & positioning menu 3D Acoustic imaging menu Support menu Sales menu  
 
   The F180 Series: Precision Attitude & Positioning  
 
 

Technical brief
Octopus 760-

Geophysical acquisition system

 

Octopus 760S
single acquisition user selectable for sidescan OR sub-bottom profiler
Octopus 760D
dual acquisition simultaneous sidescan AND sub-bottom profiler

 

 

 

INPUTS
AND
OUTPUTS

  760 Standard –
single acquisition card
  760 Dual Acquisition –
as standard 760 with the following additional features.
  Note:   With single acquisition card, the 760 is user configurable for sub-bottom or sidescan acquisition.
With dual acquisition cards, the 760 supports simultaneous sub-bottom and sidescan sonar acquisition.
           
  Analogue inputs  

4 independent 16 bit channels scalable from 125mV to 5V configurable as 4 x sidescan sonar OR 1 x sub-bottom + analogue heave input

  2 independent 16 bit channels scalable from 125mV to 5V configured as 1 x sub-bottom + analogue heave input.
           
  Analogue outputs   2 analogue outputs, selectable source, synchronous with trigger out.   1 analogue output, synchronous with trigger out.
           
  Trigger input   Single trigger input with variable threshold, synchronises all channels.   Single trigger input with variable threshold.
Can operate asynchronously to main trigger.
     

 

   
  Trigger outputs   Internal trigger (5v) user selectable range, 25-1000m. Delayed trigger synced to start of sub-bottom acquisition.   Internal trigger (5v), user selectable range 50 - 1000mS. Delayed trigger synced to start of sub-bottom acquisition.
           
  Navigation & fix data   2 x RS232 serial inputs (9 pin D-type) for NMEA navigation (GGA, GLL, VTG, RMC etc.) or Octopus fix and annotation strings.
Additional inputs on request.
           
  GPS   Optional in-built GPS (with DGPS and/or WASS) for fully self contained operation. Antenna connection at rear. Available mid 2004
           
  Printer interfaces   Centronics (25 way D-type) interface for Octopus, EPC, Ultra and Isys printers. SCSI interface for Alden/GeoPrinter (SCSI interface optional)
           
  Network   10/100/1000 MbitS-1 Ethernet interface (RJ45).
       
  Other interfaces   USB x 2 (standard)
SCSI II (optional), others available on request.
       
 

DATA RECORDING

  Recording devices   Internal 2.5" shock mounted hard disk (60Gb)
Single DVD RAM/CD-R drive as standard.
Optional second DVD RAM/CD-R.
Other devices such as DAT, removable HDD etc. available on request.
           
  Recording formats   Sidescan sonar - XTF, Coda, GeoPro
Sub-bottom profiler - SEGY, Coda, XTF
All data is recorded raw (without gain or processing applied).
       
 

DISPLAY MODES

  Sidescan   Up to 4 channels of sidescan in vertical scrolling waterfall display with co-registered oscilloscope.
All gain and processing controls on-screen.
           
  Sub-bottom   Single channel sub-bottom profiler display, horizontal scrolling with co-registered oscilloscope display. Pan and zoom functions for optimum data view. All gain and processing controls on-screen.
           
  Dual format   Simultaneous vertically scrolling sidescan AND horizontally scrolling sub-bottom.
           
  Navigation   All navigation, fix, annotation and status information shown on all screens.
       
 

CONTROLS

  User Interface   Familiar Octopus 7 key interface allowing quick and easy navigation to all functions without the need for a mouse. Arrow keys snap between groups of controls and allow selection of specific functions. Y & N keys allow settings to be saved or cancelled. PAGE key allows rapid selection of display screens.
       
 

PROCESSING

  Sidescan   Channel-independent gain & TVG. Bottom tracking, slant-range correction.
           
  Sub-bottom   Gain, three stage TVG, high & low pass time varied filters (TVF), time varied stacking, swell compensation (automatic or external heave input).
       
 

PHYSICAL

  Dimensions   443mm(w) x 355mm(h) x 235mm(d) (19" rack compatible).
           
  Weight   15kg
           
  Power   90-250Vac 47-400Hz, 200Watts.
Optional 24Vdc
Optional in-built UPS coupled with automatic power management and controlled shutdown capability guards against power loss problems. NB. requires optional 24V battery pack in place of second DVD drive
           
  Construction   Rugged but lightweight aluminium chassis with anodised front panel
     

 

   
  Display   High-brightness 15" TFT screen, 1024x768 resolution
       
  Controls   Octopus 7-key user controls for all functions
       
   
 

 

 

CodaOctopus Products Ltd, CodaOctopus Products Inc and CodaOctopus OmniTech A S are subsidiary companies of Coda Octopus Group, Inc Copyright © 2008 CodaOctopus Products Ltd. All rights reserved. Product prices, specifications and availability are subject to change without notice.
| www.codaoctopus.com on | Privacy & Use of web site statements |

 
 
 
Further product information
Product summary
Technical brief
   
  Product literature
 
PDF screen resolution Octopus 760series datasheet
 
Associated products & systems
  Processing and Interpretation
  Greyscale thermal printers
 
Request specific information
   
  Alternative solutions
   
  Can't open PDFs?  -  Download Adobe Reader for free by clicking here!
 
   
 
Home Marine geophysical survey Octopus data acquisition and interpretation products